Three-dimensional ultrasound for knee osteophyte depiction: a comparative study to computed tomography.

PURPOSE: Osteophytes are common radiographic markers of osteoarthritis. However, they are not accurately depicted using conventional imaging, thus hampering surgical interventions that rely on pre-operative images. Studies have shown that ultrasound (US) is promising at detecting osteophytes and monitoring the progression of osteoarthritis. Furthermore, three-dimensional (3D) ultrasound reconstructions may offer a means to quantify osteophytes. The purpose of this study was to compare the accuracy of osteophyte depiction in the knee joint between 3D US and conventional computed tomography (CT). METHODS: Eleven human cadaveric knees were pre-screened for the presence of osteophytes. Three osteoarthritic knees were selected, and then, 3D US and CT images were obtained, segmented, and digitally reconstructed in 3D. After dissection, high-resolution structured light scanner (SLS) images of the joint surfaces were obtained. Surface matching and root mean square (RMS) error analyses of surface distances were performed to assess the accuracy of each modality in capturing osteophytes. The RMS errors were compared between 3D US, CT and SLS models. RESULTS: Average RMS error comparisons for 3D US versus SLS and CT versus SLS models were 0.87 mm ± 0.33 mm (average ± standard deviation) and 0.95 mm ± 0.32 mm, respectively. No statistical difference was found between 3D US and CT. Comparative observations of imaging modalities suggested that 3D US better depicted osteophytes with cartilage and fibrocartilage tissue characteristics compared to CT. CONCLUSION: Using 3D US can improve the depiction of osteophytes with a cartilaginous portion compared to CT. It can also provide useful information about the presence and extent of osteophytes. Whilst algorithm improvements for automatic segmentation and registration of US are needed to provide a more robust investigation of osteophyte depiction accuracy, this investigation puts forward the potential application for 3D US in routine diagnostic evaluations and pre-operative planning of osteoarthritis.

Technical report: Rapid intraoperative reconstruction of cranial implants using additively manufactured moulds.

During craniotomies, a portion of the calvarium or skull is removed to gain access to the intracranial space. When it is not possible to re-implant the flap, surgeons may repair the defect intraoperatively or at a later date. With larger defects being more difficult to repair intraoperatively, we investigated a method for the creation of patient-specific moulds for ad hoc bone flap reconstruction using rapid prototyping. Patient-specific moulds were created based on light scanned models of the defect, using custom software and rapid prototyping. Polymethylmethacrylate bone implants were created for three retrospective craniotomy cases and evaluated based on original flap and skull reconstruction accuracy. Bone implants created using our moulding method reconstruct the original flap and skull with an average reconstruction accuracy of 0.82 and 1.3 mm, respectively. Average skull reconstruction accuracy obtained by surgeons performing freehand implant reconstruction was 1.49 mm. Time needed to generate moulds was between 2 h and 45 min and 6 h and 20 min. Improvements to current printing technology will make this procedure technically feasible for future cranial procedures.

Intraoperative integration of structured light scanning for automatic tissue classification: a feasibility study.

PURPOSE: Structured light scanning is a promising inexpensive and accurate intraoperative imaging modality. Integration of these scanners in surgical workflows has the potential to enable rapid registration and augment preoperative imaging, in a practical and timely manner in the operating theatre. Previously, we have demonstrated the intraoperative feasibility of such scanners to capture anatomical surface information with high accuracy. The purpose of this study was to investigate the feasibility of automatically characterizing anatomical tissues from textural and spatial information captured by such scanners using machine learning. Assisted or automatic identification of relevant components of a captured scan is essential for effective integration of the technology in surgical workflow. METHODS: During a clinical study, 3D surface scans for seven total knee arthroplasty patients were collected, and textural and spatial features for cartilage, bone, and ligament tissue were collected and annotated. These features were used to train and evaluate machine learning models. As part of our preliminary preparation, three fresh-frozen knee cadaver specimens were also used where 3D surface scans with texture information were collected during different dissection stages. The resulting models were manually segmented to isolate texture information for muscles, tendon, cartilage, and bone. This information, and detailed labels from dissections, provided an in-depth, finely annotated dataset for building machine learning classifiers. RESULTS: For characterizing bone, cartilage, and ligament in the intraoperative surface models, random forest and neural network-based models achieved an accuracy of close to 80%, whereas an accuracy of close to 90% was obtained when only characterizing bone and cartilage. Average accuracy of 76-82% was reached for cadaver data in two-, three-, and four-class tissue separation. CONCLUSIONS: The results of this project demonstrate the feasibility of machine learning methods to accurately classify multiple types of anatomical tissue. The ability to automatically characterize tissues in intraoperatively collected surface models would streamline the surgical workflow of using structured light scanners-paving the way to applications such as 3D documentation of surgery in addition to rapid registration and augmentation of preoperative imaging.

Patient-Specific Surgical Guidance System for Intelligent Orthopaedics.

Clinical benefits for image-guided orthopaedic surgical systems are often measured in improved accuracy and precision of tool trajectories, prosthesis component positions and/or reduction of revision rate. However, with an ever-increasing demand for orthopaedic procedures, especially joint replacements, the ability to increase the number of surgeries, as well as lowering the costs per surgery, is generating a similar interest in the evaluation of image-guided orthopaedic systems. Patient-specific instrument guidance has recently gained popularity in various orthopaedic applications. Studies have shown that these guides are comparable to traditional image-guided systems with respect to accuracy and precision of the navigation of tool trajectories and/or prosthesis component positioning. Additionally, reports have shown that these single-use instruments also improve operating room management and reduce surgical time and costs. In this chapter, we discuss how patient-specific instrument guidance provides benefits to patients as well as to the health-care community for various orthopaedic applications.

Mesenchymal Stem Cells Isolated from the Anterior Cruciate Ligament: Characterization and Comparison of Cells from Young and Old Donors.

PURPOSE: Mesenchymal stem cells (MSCs) isolated from the anterior cruciate ligament (ACL) share multiple characteristics of bone marrow-derived mesenchymal stem cells (BMSCs), allowing their use for regenerative therapies. Injuries to the ACL can affect people of all ages. This study assesses whether the regenerative potential of ACL-derived MSCs (ACL-MSCs) from old donors is as high as the potential of ACL-MSCs from young donors. MATERIALS AND METHODS: ACL-MSCs were isolated from ACL tissues obtained from young and old donors at the time of ACL reconstruction or arthroplasty. Proliferative capacity, multilineage differentiation potential (chondrogenic, osteogenic, and adipogenic lineages), and transcriptome-wide gene expression were assessed and compared between young and old donors. BMSCs of middle-aged donors served as an additional comparator. RESULTS: No substantial differences between ACL-MSCs from young and old donors were observed in their proliferative capacity and multilineage differentiation potential. The latter did not substantially differ between both ACL-MSC groups and BMSCs. Differential expression of genes related to the cytoskeleton and to protein dephosphorylation amongst other pathways was detected between ACL-MSCs from young and old donors. CONCLUSIONS: Regenerative potential of ACL-MSCs from old donors was not substantially lower than that from young donors, suggesting that regenerative therapies of ACL tears are feasible in both age groups. In vivo studies of the effect of age on the efficacy of such therapies are needed.

Rectus Capitis Posterior Minor: Histological and Biomechanical Links to the Spinal Dura Mater.

STUDY DESIGN: Serial histological investigation was performed on 10 cadaveric specimens and biomechanical tests were performed on five specimens, both focused on the tissue connexion between the rectus capitis posterior minor (RCPMi) and the spinal dura. OBJECTIVE: This study had two components: to clarify the microscopic structure of the tissue link between RCPMi and the dura mater, and to evaluate the mechanical role of this tissue complex. SUMMARY OF BACKGROUND DATA: Dissection-based and imaging-based reports have suggested a connective tissue link between the RCPMi and the dura mater at the posterior-atlanto-occipital (PAO) level. Existence of this link, and properties, remain unclear. METHODS: Histological investigation: RCPMi muscles, their bony attachments, PAO space, and adjacent spinal dura mater were resected from 10 cadavers. Tissues were subdivided into medial and lateral parts. Serial histological sections were prepared to cover maximum surface area; Masson trichrome stain was used to evaluate the tissue connection. Biomechanical investigation: individualized RCPMi muscles from five cadavers were detached from their origin. Each muscle was loaded incrementally up to 2 kg, with the cervical spine hyperextended. Using a structured light scanner, the dura mater was scanned for each loaded state. Comparison between unloaded and each loaded scanned surface quantified the displacement of the dura mater. RESULTS: Histological investigation confirmed the existence of a connective tissue link between the RCPMi and the dura mater. The biomechanical testing suggests that this tissue link complex can reduce the bulging of the dura mater into the spinal canal, caused during hyperextension, by 53.4% ±â€Š6.9% under RCPMi loading. CONCLUSION: This histological investigation clarified the structure of the tissue link between the RCPMi and the dura mater. The biomechanical testing indicated a potential mechanical function of the RCPMi in regards to the spinal dura mater, which may include a stabilizing role of the dura mater during neck extension. LEVEL OF EVIDENCE: N/A.

Component Position and Metal Ion Levels in Computer-Navigated Hip Resurfacing Arthroplasty.

BACKGROUND: Metal ion levels are used as a surrogate marker for wear in hip resurfacing arthroplasties. Improper component position, particularly on the acetabular side, plays an important role in problems with the bearing surfaces, such as edge loading, impingement on the acetabular component rim, lack of fluid-film lubrication, and acetabular component deformation. There are little data regarding femoral component position and its possible implications on wear and failure rates. The purpose of this investigation was to determine both femoral and acetabular component positions in our cohort of mechanically stable hip resurfacing arthroplasties and to determine if these were related to metal ion levels. METHODS: One hundred fourteen patients who had undergone a computer-assisted metal-on-metal hip resurfacing were prospectively followed. Cobalt and chromium levels, Harris Hip, and UCLA activity scores in addition to measures of the acetabular and femoral component position and angles of the femur and acetabulum were recorded. RESULTS: Significant changes included increases in the position of the acetabular component compared to the native acetabulum; increase in femoral vertical offset; and decreases in global offset, gluteus medius activation angle, and abductor arm angle (P < .05). Multiple regression analysis found no significant predictors of cobalt and chromium metal ion levels. CONCLUSION: Femoral and acetabular components placed in acceptable position failed to predict increased metal ion levels, and increased levels did not adversely impact patient function or satisfaction. Further research is necessary to clarify factors contributing to prosthesis wear.

Intraoperative application of hand-held structured light scanning: a feasibility study.

PURPOSE: Structured light scanning is an emerging technology that shows potential in the field of medical imaging and image-guided surgery. The purpose of this study was to investigate the feasibility of applying a hand-held structured light scanner in the operating theatre as an intraoperative image modality and registration tool. METHODS: We performed an in vitro study with three fresh frozen knee specimens and a clinical pilot study with three patients (one total knee arthroplasty and two hip replacements). Before the procedure, a CT scan of the affected joint was obtained and isosurface models of the anatomies were created. A conventional surgical exposure was performed, and a hand-held structured light scanner (Artec Group, Palo Alto, USA) was used to scan the exposed anatomy. Using the texture information of the scanned model, bony anatomy was selected and registered to the CT models. Registration RMS errors were documented, and distance maps between the scanned model and the CT model were created. RESULTS: For the in vitro trial, the average RMS error was 1.00 mm for the femur and 1.17 mm for the tibia registration. We found comparable results during clinical trials, with an average RMS error of 1.3 mm. CONCLUSIONS: The results of this preliminary study indicate that structured light scanning could be applied accurately and safely in a surgical environment. This could result in a variety of applications for these scanners in image-guided interventions as intraoperative imaging and registration tools.

Image-guided techniques improve accuracy of mosaic arthroplasty.

PURPOSE: Mosaic arthroplasty is a surgical technique in which a set of cylindrical osteochondral grafts is transplanted from non-load-bearing areas of the joint to repair damaged articular cartilage. Incongruity between the graft surface and the adjacent cartilage at the repair site results in inferior clinical outcomes. This paper compares technical outcome using three mosaic arthroplasty techniques (conventional, optoelectronic, and patient-specific template) on femur models. METHODS: Three distinct sets of femur models with defects were created. Preoperatively, the harvest and delivery sites were planned using custom software. Five orthopedic surgeons were recruited; each surgeon performed each of the three surgical techniques on each of the three bone models with defect. During the optoelectronic trials, the instrument position and orientation were tracked and superimposed onto the surgical plan. For the patient-specific template trials, plastic templates were manufactured to fit over the defects with cylindrical holes to guide the surgical tools according to the plan. Postoperatively, the femur models were computer tomography and laser scanned. Several measures were made to compare surgical techniques: operative time; surface congruency; defect coverage; graft surface area that is proud or recessed; air volume below the grafts; and distance and angle of the grafts from the surgical plan. RESULTS: The patient-specific template and optoelectronic techniques resulted in improved surface congruency, defect surface coverage, and below-graft air gap volume in comparison with the conventional technique. However, the conventional technique had a shorter operative time. CONCLUSIONS: Image-guided techniques can improve the accuracy of mosaic arthroplasty, which could result in better clinical outcomes.

Characterization of bursa subacromialis-derived mesenchymal stem cells.

INTRODUCTION: The bursa subacromialis (BS) provides the gliding mechanism of the shoulder and regenerates itself after surgical removal. Therefore, we explored the presence of mesenchymal stem cells (MSCs) within the human adult BS tissue and characterized the BS cells compared to MSCs from bone marrow (BMSCs) on a molecular level. METHODS: BS cells were isolated by collagenase digest from BS tissues derived from patients with degenerative rotator cuff tears, and BMSCs were recovered by adherent culture from bone-marrow of patients with osteoarthritis of the hip. BS cells and BMSCs were compared upon their potential to proliferate and differentiate along chondrogenic, osteogenic and adipogenic lineages under specific culture conditions. Expression profiles of markers associated with mesenchymal phenotypes were comparatively evaluated by flow cytometry, immunohistochemistry, and whole genome array analyses. RESULTS: BS cells and BMSCs appeared mainly fibroblastic and revealed almost similar surface antigen expression profiles, which was CD44(+), CD73(+), CD90(+), CD105(+), CD106(+), STRO-1(+), CD14(-), CD31(-), CD34(-), CD45(-), CD144(-). Array analyses revealed 1969 genes upregulated and 1184 genes downregulated in BS cells vs. BMSCs, indicating a high level of transcriptome similarity. After 3 weeks of differentiation culture, BS cells and BMSCs showed a similar strong chondrogenic, adipogenic and osteogenic potential, as shown by histological, immunohistochemical and RT-PCR analyses in contrast to the respective negative controls. CONCLUSIONS: Our in vitro characterizations show that BS cells fulfill all characteristics of mesenchymal stem cells, and therefore merit further attention for the development of improved therapies for various shoulder pathologies.

Growth factor stimulation improves the structure and properties of scaffold-free engineered auricular cartilage constructs.

The reconstruction of the external ear to correct congenital deformities or repair following trauma remains a significant challenge in reconstructive surgery. Previously, we have developed a novel approach to create scaffold-free, tissue engineering elastic cartilage constructs directly from a small population of donor cells. Although the developed constructs appeared to adopt the structural appearance of native auricular cartilage, the constructs displayed limited expression and poor localization of elastin. In the present study, the effect of growth factor supplementation (insulin, IGF-1, or TGF-ß1) was investigated to stimulate elastogenesis as well as to improve overall tissue formation. Using rabbit auricular chondrocytes, bioreactor-cultivated constructs supplemented with either insulin or IGF-1 displayed increased deposition of cartilaginous ECM, improved mechanical properties, and thicknesses comparable to native auricular cartilage after 4 weeks of growth. Similarly, growth factor supplementation resulted in increased expression and improved localization of elastin, primarily restricted within the cartilaginous region of the tissue construct. Additional studies were conducted to determine whether scaffold-free engineered auricular cartilage constructs could be developed in the 3D shape of the external ear. Isolated auricular chondrocytes were grown in rapid-prototyped tissue culture molds with additional insulin or IGF-1 supplementation during bioreactor cultivation. Using this approach, the developed tissue constructs were flexible and had a 3D shape in very good agreement to the culture mold (average error <400 µm). While scaffold-free, engineered auricular cartilage constructs can be created with both the appropriate tissue structure and 3D shape of the external ear, future studies will be aimed assessing potential changes in construct shape and properties after subcutaneous implantation.

Estimating the density of femoral head trabecular bone from hip fracture patients using computed tomography scan data.

The purpose of this study was to compare computed tomography density (ρCT ) obtained using typical clinical computed tomography scan parameters to ash density (ρash ), for the prediction of densities of femoral head trabecular bone from hip fracture patients. An experimental study was conducted to investigate the relationships between ρash and ρCT and between each of these densities and ρbulk and ρdry . Seven human femoral heads from hip fracture patients were computed tomography-scanned ex vivo, and 76 cylindrical trabecular bone specimens were collected. Computed tomography density was computed from computed tomography images by using a calibration Hounsfield units-based equation, whereas ρbulk, ρdry and ρash were determined experimentally. A large variation was found in the mean Hounsfield units of the bone cores (HUcore) with a constant bias from ρCT to ρash of 42.5 mg/cm3. Computed tomography and ash densities were linearly correlated (R 2 = 0.55, p < 0.001). It was demonstrated that ρash provided a good estimate of ρbulk (R 2 = 0.78, p < 0.001) and is a strong predictor of ρdry (R 2 = 0.99, p < 0.001). In addition, the ρCT was linearly related to ρbulk (R 2 = 0.43, p < 0.001) and ρdry (R 2 = 0.56, p < 0.001). In conclusion, mineral density was an appropriate predictor of ρbulk and ρdry , and ρCT was not a surrogate for ρash . There were linear relationships between ρCT and physical densities; however, following the experimental protocols of this study to determine ρCT , considerable scatter was present in the ρCT relationships.

A laboratory comparison of computer navigation and individualized guides for distal radius osteotomy.

PURPOSE: This article presents the results of a multiuser, randomized laboratory trial comparing the accuracy and precision of image-based navigation against individualized guides for distal radius osteotomy (DRO). METHODS: Six surgeons each performed four DROs using image-based navigation and four DROs using individualized guides in a laboratory setting with plastic phantom replicas of radii from patients who had received DRO as treatment for radial deformity. Time required and correction errors of ulnar variance, radial inclination, and volar tilt were measured. RESULTS: There were no statistically significant differences in the average correction errors. There was a statistically significant difference in the standard deviation of ulnar variance error (2.0 mm for navigation vs. 0.6 mm for guides). There was a statistically significant difference in the standard deviation of radial inclination error ([Formula: see text] for navigation vs. [Formula: see text] for guides). There were statistically significant differences in the times required (705 s for navigation vs. 214 s for guides) and their standard deviations (144 s for navigation vs. 98 s for guides). CONCLUSIONS: Compared to navigated DRO, individualized guides were easier to use, faster, and produced more precise correction of ulnar variance and radial inclination. The combination of true three-dimensional planning, ease of use, and accurate and precise corrective guidance makes the individualized guide technique a promising approach for performing corrective osteotomy of the distal radius.

Image-guided distal radius osteotomy using patient-specific instrument guides.

In this article, we describe a method for computer-assisted distal radius osteotomies in which computer-generated, patient-specific plastic guides are used for intraoperative guidance. Before surgery, the correction and plate location are planned using computed tomography scans for both radii and ulnae, and the planned locations of the distal and proximal drill holes for the plate are saved. A plastic, patient-specific instrument guide is created using a rapid prototyping machine into which a mirror image of intraoperative, accessible bone structure of the distal radius is integrated. This allows for unique positioning of the guide during surgery. For each planned drill location, a guidance hole is incorporated into the guide. During surgery, a conventional incision is made, and the guide is positioned on the radius. The surgeon drills the holes for the plate screws into the intact radius and performs the osteotomy using the conventional technique. Using the predrilled holes, the surgeon affixes the plate to the radius fragments. The guides are easy to integrate into the surgical workflow and minimize the need for intraoperative fluoroscopy for guidance of the procedure.

Image-Guided Techniques Improve the Short-Term Outcome of Autologous Osteochondral Cartilage Repair Surgeries: An Animal Trial.

OBJECTIVE: Autologous osteochondral cartilage repair is a valuable reconstruction option for cartilage defects, but the accuracy to harvest and deliver osteochondral grafts remains problematic. We investigated whether image-guided methods (optically guided and template guided) can improve the outcome of these procedures. DESIGN: Fifteen sheep were operated to create traumatic chondral injuries in each knee. After 4 months, the chondral defect in one knee was repaired using (a) conventional approach, (b) optically guided method, or (c) template-guided method. For both image-guided groups, harvest and delivery sites were preoperatively planned using custom-made software. During optically guided surgery, instrument position and orientation were tracked and superimposed onto the surgical plan. For the template-guided group, plastic templates were manufactured to allow an exact fit between template and the joint anatomy. Cylindrical holes within the template guided surgical tools according to the plan. Three months postsurgery, both knees were harvested and computed tomography scans were used to compare the reconstructed versus the native pre-injury joint surfaces. For each repaired defect, macroscopic (International Cartilage Repair Society [ICRS]) and histological repair (ICRS II) scores were assessed. RESULTS: Three months after repair surgery, both image-guided surgical approaches resulted in significantly better histology scores compared with the conventional approach (improvement by 55%, P < 0.02). Interestingly, there were no significant differences found in cartilage surface reconstruction and macroscopic scores between the image-guided and the conventional surgeries.

Development of large engineered cartilage constructs from a small population of cells.

Confronted with articular cartilage's limited capacity for self-repair, joint resurfacing techniques offer an attractive treatment for damaged or diseased tissue. Although tissue engineered cartilage constructs can be created, a substantial number of cells are required to generate sufficient quantities of tissue for the repair of large defects. As routine cell expansion methods tend to elicit negative effects on chondrocyte function, we have developed an approach to generate phenotypically stable, large-sized engineered constructs (≥3 cm(2) ) directly from a small amount of donor tissue or cells (as little as 20,000 cells to generate a 3 cm(2) tissue construct). Using rabbit donor tissue, the bioreactor-cultivated constructs were hyaline-like in appearance and possessed a biochemical composition similar to native articular cartilage. Longer bioreactor cultivation times resulted in increased matrix deposition and improved mechanical properties determined over a 4 week period. Additionally, as the anatomy of the joint will need to be taken in account to effectively resurface large affected areas, we have also explored the possibility of generating constructs matched to the shape and surface geometry of a defect site through the use of rapid-prototyped defect tissue culture molds. Similar hyaline-like tissue constructs were developed that also possessed a high degree of shape correlation to the original defect mold. Future studies will be aimed at determining the effectiveness of this approach to the repair of cartilage defects in an animal model and the creation of large-sized osteochondral constructs.

Indian hedgehog gene transfer is a chondrogenic inducer of human mesenchymal stem cells.

INTRODUCTION: To date, no single most-appropriate factor or delivery method has been identified for the purpose of mesenchymal stem cell (MSC)-based treatment of cartilage injury. Therefore, in this study we tested whether gene delivery of the growth factor Indian hedgehog (IHH) was able to induce chondrogenesis in human primary MSCs, and whether it was possible by such an approach to modulate the appearance of chondrogenic hypertrophy in pellet cultures in vitro. METHODS: First-generation adenoviral vectors encoding the cDNA of the human IHH gene were created by cre-lox recombination and used alone or in combination with adenoviral vectors, bone morphogenetic protein-2 (Ad.BMP-2), or transforming growth factor beta-1 (Ad.TGF-ß1) to transduce human bone-marrow derived MSCs at 5 × 10² infectious particles/cell. Thereafter, 3 × 105 cells were seeded into aggregates and cultured for 3 weeks in serum-free medium, with untransduced or marker gene transduced cultures as controls. Transgene expressions were determined by ELISA, and aggregates were analysed histologically, immunohistochemically, biochemically and by RT-PCR for chondrogenesis and hypertrophy. RESULTS: IHH, TGF-ß1 and BMP-2 genes were equipotent inducers of chondrogenesis in primary MSCs, as evidenced by strong staining for proteoglycans, collagen type II, increased levels of glycosaminoglycan synthesis, and expression of mRNAs associated with chondrogenesis. IHH-modified aggregates, alone or in combination, also showed a tendency to progress towards hypertrophy, as judged by the expression of alkaline phosphatase and stainings for collagen type X and Annexin 5. CONCLUSION: As this study provides evidence for chondrogenic induction of MSC aggregates in vitro via IHH gene delivery, this technology may be efficiently employed for generating cartilaginous repair tissues in vivo.

Are hip resurfacing arthroplasties meeting the needs of our patients? A 2-year follow-up study.

Hip resurfacing arthroplasty (HRA) is a treatment of end-stage hip arthritis in young patients with excellent bone stock. One hundred four consecutive HRAs (Depuy ASR, Warsaw, Ind) were performed with 36-Item Short Form Health Survey (SF-36), Western Ontario and McMaster University Osteoarthritis Index, Harris Hip Scores, and University of California, Los Angeles activity ratings obtained preoperatively, at 6 months, and at 1 and 2 years postoperatively. Four patients required conversion to total hip arthroplasty. All patients showed significant improvements in their activity, pain, stiffness, and function postoperatively. Patients with lower SF-36 mental component scores (MCSs) improved their MCS compared with those of the general population, as well as improving their pain and physical functioning scores. These findings demonstrate reliable improvements in standard quality of life measures in patients undergoing HRA, including those with low preoperative SF-36 MCS.

Computer-assisted mosaic arthroplasty using patient-specific instrument guides.

PURPOSE: Success of mosaic arthroplasty requires that the transplanted plugs be positioned to reconstruct the curvature and height of the original articular surface. This case report demonstrates how to achieve correct plug positioning using patient-specific instrument guides manufactured on a 3D printer. METHODS: Using a 3D computer model of bone and cartilage, the harvesting of plugs and their placement at the defect site was planned on the computer. Instrument guides were manufactured in thermoplastic on a 3D printer; the bottom surface of the guides fit to the contour of the knee and the top surface contained holes to precisely position the surgical instruments. The instrument guides were used on a young female patient to repair a large articular cartilage defect in the left knee. RESULTS: The patient showed an increased range of motion in the knee and also a decrease in pain and discomfort at her 2-year follow-up. A CT arthrogram at 2 years postoperative showed a smooth and appropriate contour of the reconstructed cartilage over the defect. CONCLUSIONS: Image-based preoperative planning and the use of patient-specific instrument guides can yield a good patient outcome without requiring optically tracked intraoperative guidance.